Accessory 11BG

A programmable engine exerciser that provides for weekly or biweekly operation, includes one form C contact for source availability of normal and emergency (contact rating 2 amps @ 30VDC, 0.5 amp. @ 125 VAC resistive). The programmable engine exerciser incorporates a 7 day or 14 day time base with a digital readout display. Includes "with or without" load control switch for exerciser period. Daylight Savings Time 2007 compatible.

 

Engine Exerciser with Source Availability Contacts Accessory 11BG

Accessory 14AA/BA (not pictured)

Auxiliary contacts to indicate position of main contacts. Two (2) for normal and two (2) for emergency position (one set is standard

Accessory 44G

Strip Heater with thermostat, wired to load terminals: 208-240, 360-380, 460-480, 550-600 volts. Contains wiring harnesses for all transfer switch sizes.


(Strip Heater Kit Accessory 44G )

Accessory 72A

Communications Interface Module (RS-485) to allow local or remote communications with ASCO PowerQuest® VPi or SITEWEBTM communications products


(Serial Interface Module Accessory 72A )

Accessory 72E

Connectivity Module 5150 is used to bring several different serial devices that communicate at different baud rates and with different protocols to a common Ethernet media. (See Remote Monitoring Section)


(Connectivity Module Accessory 72E)

Accessory 73A
ASCO Pulsar® 450 High-Performance Surge Suppressor

The ASCO Pulsar® 450 provides unparalleled protection from power surges and transients. It is a high-performance surge suppressor which limits large surges and transients through a unique array of computer-matched metal oxide varistors (MOVs). Unique four-cavity sand packed UL94-5 volt rated housing, UL 1449, UL 1283, and CSA listed. Available with all mode protection Line to Ground (L-G), Line to Line (L-L), Line to Neutral (L-N), and Neutral to Ground (N-G). Please contact ASCO for ordering information.


(Surge Suppressor Pulsar 450)

Accessory 123

A protective window that includes a polycarbonate frame and weather gasket to provide secure access to the membrane interface for the Type 1 Enclosures.

(Window Kit Accessory 123 )

Field Conversion Kits for Series 300 Transfer Switches