PRODUCTS

AC Power and UPS

Fire Pump Controllers

Alarm Panels

Jockey XG Pump Controllers

Electric Fire Pump Controllers (600V max.)

Diesel Engine Fire Pump

Firetrol FTA1100-H Diesel Engine Fire Pump Controller

Firetrol FTA1100-J Diesel Engine Fire Pump Controller

Medium Voltage Fire Pump Controllers (7200V max.)

Power Transfer Switches

Industrial Power

Infrastructure Management

KVM

Monitoring

Outside Plant

Power Switching and Controls

Precision Cooling

Racks and Integrated Cabinets

Renewable and Hybrid Energy

Surge Protection

Technical and Mobile Workstations

Firetrol FTA1100-H Diesel Engine Fire Pump Controller

Automatic and Manual Mark II-Based Fire Pump Controllers

FIRECAT PRODUCT CATALOG
WHERE TO BUY

Emerson Network Power > United States > Products > Fire Pump Controllers > Diesel Engine Fire Pump > Firetrol FTA1100-H Diesel Engine Fire Pump Controller

Firetrol^® FTA1100H combined automatic and manual Mark II based diesel engine fire pump controllers are intended for starting and monitoring fire pump diesel engines in Class1, Division 2 hazardous locations. The controllers have a temperature rating of T3. They are available for use with 12 or 24 volt negative ground systems using lead acid or Nickel-Cadmium batteries, and available with 10 or 20 amp charging circuits. The controller monitors, displays and records fire pump system information.

Firetrol fire pump controllers are listed by Underwriters’ Laboratories, Inc., in accordance with UL1604, Electrical Equipment for Use in Class 1 and II, Division 2, and Class III Hazardous (Classified) Locations and UL698, Industrial Control Equipment for Use in Hazardous (Classified) Locations. They are built to meet or exceed the requirements of NFPA 20, Installation of Centrifugal Fire Pumps, and NFPA 70, National Electrical Code.

The Firetrol Mark II provides superior ease of operation and a greater range of options. Our common look and feel between the diesel and electric interfaces means reduced training time for operators of multiple installation applications. The ability to scroll through date stamped recorded data in steps of 1, 10, or 100 events allows users to quickly locate an event when doing diagnostics. And the Mark II's communications capabilities - supporting ModBus and other protocols - offers connectivity to a wide array of building management systems. The list goes on and on - text messaging instead of LED indicator lights, and the ability to add up to 8 customized alarms.

For immediate information contact your local Firetrol Representative or Firetrol directly at 919-460-5200.

Print Page

Features
Options/Modifications
Product Information/Sales
Product Information/Technical

The Firetrol Mark IIXG fire pump controller monitors, displays and records fire pump system information. The system is standard on all diesel engine fire pump controllers. A USB Host controller and port are also included as standard.

The door mounted display/interface panel is rated for NEMA Type 4 applications and features a 80 Character Vacuum Fluorescent Display, Membrane Type User Control Push-Buttons and easy to read LED indication of the following conditions:

AC Power Available
Alarm
Main Switch In Auto
Main Switch In Manual
System Pressure Low
Engine Running
Engine Fail To Start
Engine Temperature High
Engine Oil Pressure Low
Engine Overspeed
Engine Alternate ECM
Engine Fuel Injector Malfunction
Fuel Level Low
Automatic Shutdown Disabled
Charger Malfunction
Battery #1 Trouble
Battery #2 Trouble

Additionally, the controller is constructed with the following features specifically for the C1, D2 application:

Top Mounted Enclosure Lifting Brackets
Hermetically Sealed Pilot Devices and Relays
SIS Type Wiring and Sleeve Type Wire Markers
Stainless Steel Back Pan
Door Stop Bracket (Holds door in open position)
Enclosure Gland Plate
ECD Drains (To drain accumulated condensate)
External White Nameplates with Black Nomenclature
6” Base Mounting Legs
Door Clamps and Padlock Hasp

Features

SPECIAL ENCLOSURES
-T	NEMA Type 3R (IEC IP14), Painted Steel
-E	NEMA Type 4 (IEC IP56), Painted Steel
-F	NEMA Type 4X (IEC IP56), #304 Stainless Steel,
-FXP	NEMA Type 4X (IEC IP56), #304 Stainless Steel, Painted Finish, Unfi nished**
-FD	NEMA Type 4X (IEC IP56), #316 Stainless Steel, Unfinished**
-FDB	NEMA Type 4X (IEC IP56), 12 Gauge, Seam Welded, #316 Stainless Steel, Polished and Brushed Finish
-FDP	NEMA Type 4X (IEC IP56), #316 Stainless Steel Painted Finish
-G	NEMA Type 12 (IEC IP52), Painted Steel ** Unfi nished (Not painted, polished or brushed).
MOUNTING LEGS
-N31	Standard 12” Mounting Legs
-N32	Base Mounting Legs 6”
ANTI-CONDENSATION SPACE HEATERS
-H	120 Volt Space Heater
-J	120 Volt Space Heater With Thermostat
-K	120 Volt Space Heater With Humidistat
-L	240 Volt Space Heater
-M	240 Volt Space Heater With Thermostat
-N	240 Volt Space Heater With Humidistat
Pressure Transducers, Solenoid Valves, Plumbing
-B	0-600 psi (0-41.4 bars) wet parts for fresh water applications
-C	0-300 psi (0-21.1 bars) wet parts for sea water/foam or copper corrosive applications
-D	0-600 psi (0-41.4 bars) wet parts for sea water/foam or copper corrosive applications
ALARMS
-AC	Additional contacts for remote indication, engine running - 2 sets provided as standard
-AJ	Contacts for remote indication, engine overspeed
-AK	Contacts for remote indication, low oil pressure
-AL	Contacts for remote indication, high water temperature
-AM	Contacts for remote indication, engine failed to start
-AN	Contacts for remote indication, battery / charger failure
-AP	Contacts for remote indication, main switch in manual
-AR	Contacts for remote indication, main switch in off
-AS	Contacts for remote indication, main switch in auto
-AT	Contacts for remote indication, pump room trouble (common alarm)¹
-AV	Contacts for remote indication, low pump room temperature1
-AW	Contacts for remote indication, reservoir low¹
-AY	Contacts for remote indication, low suction pressure¹
-COM	Low suction pressure alarm, (Includes selectable auto/manual reset, audible, visible and remote alarms, initiating pressure switch not included)
-CPL	Contacts for remote indication, system 115% over pressure (for use with PLD engines only)
-CTS	Built-in low suction pressure alarm panel (Includes selectable auto/manual reset, audible, visible and remote alarms and mounted and wired pressure switch)
-EE	Additional contacts for remote indication, engine trouble (common alarm) - 1 set provided as standard
-EF	Additional contacts for remote indication, main switch mis-set (common alarm) - 1 set provided as standard
-EH	Contacts for remote indication, relief valve discharge1
-EJ	Visible fl ow meter on alarm ¹
-EK	Contacts for remote indication, fl ow meter on1
-JR	Visible jockey pump running indication
-JT	Audible and Visible jockey pump trouble indication
-KH	Contacts for remote indication, common output for any alarm
-LC	Contacts for remote indication, high fuel level¹
-LD	Visible fuel spill alarm¹
-LE	Contacts for remote indication, fuel spill1
-LG	Contacts for remote indication, reservoir high¹
-PE	Contacts for remote indication, low system pressure
MISCELLANEOUS
-AZ	Low pump room temperature switch, mounted and wired
-BA	220-240 Volt operation
-EL	Series pumping, high zone controller
-EM	Series pumping, mid zone controller
-EN	Series pumping, low zone controller
-S	Tropicalization
-ZPA	Customized, annual service display message (factory programmed)
-ZPN	5150 Ethernet Connectivity Module (Allows users to monitor limited controller status via a single computer or over a computer network)
-ZPM	Serial Modbus RTU Communications Protocol (Allows users to monitor all aspects of the controller status via a RS485 communications network (system integration required). (Includes RS485 to twisted pair breakout module, optical isolation module (4000 ft. range) and customer connection terminal blocks).