Edco MPA Series Modular Output File Protector


PRODUCTS
Edco MPA Series

Modular Output File Protector for Traffic Control Load Relay Outputs

Emerson Network Power > INDIA > Products > By Type > Surge Protection > Signal > Edco MPA Series Modular Output File Protector

The Edco MPA-303 Series is a modular device intended for use on traffic control load relay outputs. The Edco MPA-303-9 unit will protect six output circuits. The Edco MPA-303-6 unit will protect four output circuits.

The Edco MPA-303-9 is designed for any traffic controller cabinet equipped with 9 position, 5.08 mm spacing sockets wired in line with load relay outputs. The Edco MPA-303-6 is designed for 6 position, 5.08 mm spacing sockets.

  • Fits 6 and 9 position
  • 5.08mm spacing sockets
  • Epoxy encapsulated
  • 5 year warranty
Features
  • Modular design for 6 and 4 outputs circuits
  • Easy installation
Benefits
  • Part Number: Edco MPA-303 Series
  • Operating Voltage: 120 VAC
  • Clamping Voltage: 340 VAC
  • Operating Current: NA
  • Total Peak Surge: Current 26k (6 pos), 39k (9 pos)
  • Operating Frequency: 47-63 Hz
  • EMI Attenuation: NA
  • SPD Technology: MOVs
  • Status Indication: NA
  • Connection Type: 6 or 9 position 5.08mm Euroblock
  • Operating Temperature: -40°C to +85°C
  • Dimensions (Inches, Module only): 2.0H x 0.7W x 2.0L
  • Weight: 2 oz

Caution:
This product could become excessively hot and rupture in the rare event of power line conditions or surge that exceed its rated operating specification. Appropriate precautions should be exercised. High voltages are present on electrical termination. Unit should be serviced by qualified personnel only.

Technical Specification
Surge Suppression Products
Contact our support department about your Surge Protection product.

Telephone: +1 607 721 8840
Toll-Free: +1 800 288 6169
Contact Support