Separately Mounted


PRODUCTS

Separately Mounted

 

 

Firetrol® Separately Mounted Power Transfer Switches are designed for use when pump room size constraints will not allow an integral controller/transfer switch configuration, or where a transfer switch is now being required on an existing installation.

The power transfer switches are listed by Underwriters Laboratories, Inc. for transfer switch service and also meet the requirements of NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection and NFPA 70, National Electrical Code. The automatic/manual power transfer switches are listed by Underwriters Laboratories, Inc. under UL-1008, Automatic Transfer Switches, as well as UL-508, Industrial Control Equipment.

Separately mounted transfer switches are available in the following configurations:

FTA902 - For use with generator set emergency source - Required disconnecting means and overcurrent protection devices required for the normal side of the transfer switch are NOT supplied.

FTA903 - For use with generator set emergency source - Required disconnecting means and overcurrent protection devices required for the normal side of the transfer switch ARE provided.

FTA952 - For use with 2nd Utility emergency source - Required disconnecting means and overcurrent devices required for the normal side of the transfer switch are NOT supplied.

FTA953 - For use with 2nd Utility emergency source - Required disconnecting means and overcurrent devices required for the normal side of the transfer switch ARE provided.

Firetrol Service Support
Keep mission-critical Firetrol Systems running at optimal levels.

+1 919 462 7105
24 x 7 x 365 respon​se
Learn More