- Part Number: Edco SRA16C-1
- Operating Voltage: 75 VDC
- Clamping Voltage: 90 VDC
- Operating Current: NA
- Peak Surge Current: 10 kA
- SPD Technology: GDT
- Connection Type: Leads
- Operating Temperature: -40°C to +85°C
- Dimensions: 1" Sq., Ht. 2" max
- Mounting: No. 10 - 32 x 3/8" stud
- Weight: 3 oz
- Certifications: ISO 9001:2000
Mounting brackets are available for installing multiple units in the controller cabinet. The brackets are capable of mounting four or eight devices in-line. One Edco SRA16C-1 is used for each loop detector to be protected.
Units are installed as close as practical to the point where the detector loop wires enter the controller cabinet. Connect one of the flexible leads to each end of the loop. The common (bolt) connection on each Edco SRA16C-1 must be connected to earth ground.
Best performance is obtained by (1) shortening the fl exible leads as much as possible, and (2) providing the lowest possible impedance to ground.
The Edco SRA16C-1W/LEADS (special order) is installed very similar to the standard unit except the common (bolt) is replaced with a green wire.
Surge Suppression Products
Contact our support department about your Surge Protection product.
Telephone: +1 607 721 8840
Toll-Free: +1 800 288 6169