PRODUCTS

Electrical Features:

• The Series 200 complies with IEC60947-6-1 utilization category AC 33A inductive load transfer, frequent operation.
• Door-mounted selector switch for local, manually initiated electrical control.
• Sizes from 30 through 3000 amps. Available to 600 VAC, 50 or 60 Hz.
• Rated for all classes of load transfer. 100% tungsten load ratings through 400 amps.
• Designed for emergency and standby applications.
• Same ICM and ICW rating as Series 200.

Standard Selectable Control Features:

• Inphase monitor to transfer motor loads between live sources, without any intentional off time, to prevent inrush currents from
  exceeding normal starting levels.
• Selective load disconnect, double-throw contact to operate at an adjustable 0 to 20 second time delay prior to transfer
  and reset 0 to 20 seconds after transfer.
• High/Low nominal voltage setting. Allows user to adjust for source low reduced voltage conditions in remote areas.
  
• 60 Hz or 50 Hz selectable switch.
• Single/Three-phase selectable switch.

Control Features:

• Switch position indicating signal lights.
• One auxiliary contact closed when transfer switch is connected to normal and one closed on emergency standard feature 14A/14B.

Optional Accessories:

• 6Q Key-operated, momentary source selector switch furnished instead of the standard selector switch.
• 9C, 9D Source availability lights to provide operator with a local indication of power source availability.
• Accessory 14AA/14BA auxiliary contacts to indicate position of main contacts. Two (2) for normal position and two
  (2) for emergency position (one set is standard).
• 72A Serial module (5110) is used to allow local or remote communications with ASCO POWERQUEST® connectivity
  products.
• Special Enclosures
  (Specify by appropriate code in catalog number):
  - IP31
  - IP54
  - IP65
• 72E Connectivity Module 5150 is used to bring several different serial devices that communicate at different baud rates and with different protocols to a common Ethernet media.