Liebert STS2 Static Transfer Switch


PRODUCTS

Liebert STS2 Static Transfer Switch

Automatic Switching Between Critical Loads and Two Independent UPS Systems

For maximum availability applications, Liebert STS2 static transfer switch provides an automatic, seamless transfer between your critical load and the outputs of two independent UPS systems in a dual-bus power configuration. If the primary UPS should fail, the switch will automatically transfer the loads to the alternate UPS.

The Liebert Static Transfer Switch 2 (STS2) is available in 100A, 250A, 400A, 600A, 800A and 1000A sizes, 60Hz or 50Hz field selectable. Multiple input voltages are available. The system provides an automatic, seamless transfer between the outputs of two independent UPS systems and the input of a critical load in a dual-bus power system.

Features
  • Automatic switching for dual bus loads
  • Requires only front-only access, for easy installation and maintenance
  • Offers primary or secondary side switching
  • Operates energy efficiently
Benefits

Flexibility

  • Front access to all components provides simplifies installation and maintenance, and reduces amount of floorspace required for access.
  • Internal CANBUS protocol: high-bandwidth communication between system components via twisted-pair cables. Options can be added as simple network nodes.

Higher Availability

  • Triple redundant logic with dual power feeds.
  • Standard on-unit monitoring and optional centralized monitoring capability provide continuous system visibility.
  • 100% rated, fuseless design.
  • Hot-swappable circuit breakers.
  • Flash memory enables firmware updates while supporting critical load.
  • Rack-out control/power assembly on units up to 600A to allow maintenance, service or full replacement without disrupting the critical load.

Lowest Total Cost Of Ownership

  • When applied as primary side switching, cost are lower due to requiring only one power distribution unit, a lower current due to 480V vs. 208V, and lower installation and wiring cost.

Ideally Suited For

  • Data centers
  • Telecommunications
  • Industrial process equipment
  • Laboratories
AccessoriesLiebert Nform Enterprise Edition
Centralized Monitoring Software

Features
  • Centralized monitoring and control of SNMP devices through existing NMS
  • Provides email alerts and local notifications
  • Allows user defined automated shutdown
  • Offers an ideal solution for large businesses


Liebert SiteScan Web
Centralized Monitoring and Control

Features

  • Centralized site monitoring
  • Provides real-time monitoring and control
  • Allows alarm/event management
  • Operates compatibly with existing Building Management Systems


Liebert SiteLink
Communication Interface

Features

  • Communication interface between Liebert units and existing BMS
  • Integrates 4 or 12 units into a single device
  • Communicates with Liebert SiteScan Web or Modbus


Liebert SiteLink-E
Communication Interface

Features

  • Communication interface between Liebert/Emerson protocols and existing BMS
  • Integrates 4 or 12 units into a single device
  • Supports Modbus or BACnet


Liebert IntelliSlot 485
Interface Card

Features

  • Liebert equipment interface card
  • Operates with industry standard "Open" protocol
  • Communicates with Liebert SiteScan Web software
  • Provides remote alarm notification
Contact Support

Power Management Products
Contact our support department about your Liebert power management system.

Sales, Service, and Support
1-800-LIEBERT (543-2378)

Power/UPS Parts
1-800-394-4877

 

 

 

 

 

 

 Learn More