Edco ACP-340LED/540LED

Edco ACP-340/540LED

120VAC/240VAC-Single Phase

Emerson Network Power > CALA > Products > By Type > Surge Protection > Point-of-Use > Edco ACP-340LED and 540LED

The Edco ACP-340LED is an upgrade to the popular Edco ACP-340, adding a failure indicator as well as remote sensing circuitry. In addition, this unit offers much better lightning protection than the standard Edco ACP-340.

The Edco ACP-340/540LED filtering surge protectors absorb power line noise and switching transients that other suppressors and RFI filters pass through. They can replace the RFI filter when high attenuation of noise above 25 MHz is not required.

The Edco ACP-340/540LED utilize Thermally-protected Metal Oxide Varistors (TMOVs) with an integrated thermally activated element designed to open in the event of overheating due to the abnormal over-voltage, limited current conditions.

Product Downloads
  • 50 kA/Mode & 100 kA/Phase surge current protection
  • Thermally-protected Metal Oxide Varistors (TMOVs)
  • Power On and failure LED
  • Remote sensing circuitry
  • 5 year warranty
  • Part Number: Edco ACP-340LED/540LED
  • Operating Voltage: 120 VAC/240 VAC
  • Clamping Voltage: 395 VAC/775 VAC
  • Operating Current: 15A
  • Peak Surge Current: 50 kA/Mode, 100 kA/Phase
  • Operating Frequency: 47-63 Hz
  • EMI Attenuation: 40 dB typ
  • SPD Technology: MOVs w/L-C Filter
  • Modes of Protection: L-N, L-G, N-G
  • Status Indication: Power On & MOVs functional
  • Connection Type: 1/4-20 Stainless Steel Stud
  • Operating Temperature: -40°C to +85°C
  • Dimensions (Inches): 1.875H x 3.25W x 5.75L
  • Weight: 1 lb


DIN Rail Kit Available.
Order Part # 11604KIT

Technical Specification

Surge Suppression Products
Contact our support department about your Surge Protection product.

Telephone: +1 607 721 8840
Toll-Free: +1 800 288 6169

Contact Support