Edco 5W8-30 (Access Control Protection Module)

Edco 5W8-30
(Access Control Protection Module)
Emerson Network Power > CALA > Products > By Type > Surge Protection > Data > Edco 5W8-30 (Access Control Protection Module)

The Edco 5W8-30 is an access control protection module designed for typical Wiegand outputs for access devices. This is a 5-wire module that accommodates low voltage data lines for 5 VDC circuits. Fifth wire power protection will allow up to 24 VDC.

In addition, sneak and fault currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance in several orders of magnitude when over-currents exceed safe levels and resume a normal state when over-currents are removed. The ability to self restore in this manner significantly increases suppressor performance and survivability.

  • Resettable fusing — PTCs
  • Plug-in module
  • Automatic recovery
  • Sneak/fault current protection (data only)
  • Silicon avalanche technology
  • Requires Edco PCB1B base
  • PC462 PTU (Pass Thru Unit) available for troubleshooting
  • 5 year warranty
  • Automatic recovery
  • Fast response time
  • Data and power protection combined 
  • Operating Voltage: 5 VDC (data) & 24 VDC (power)
  • Clamping Voltage: 8 VDC (data) & 30 VDC (power)
  • Operating Current: 0.15 A
  • Peak Surge Current: Data = 125A (10 x 1000 μs)
                                     Power = 500 A (8 x 20 μs)
  • Frequency Range: 0 to 20 MHz
  • Insertion Loss: < 0.15dB at 20 MHz
  • SPD Technology: MOV, SAD, w/ Series PTC
  • Connection Type: Terminal block w/compression lugs
                                Terminals accept up to 10 AWG
  • Operating Temperature: -40°C to +85°C
  • Dimensions (Inches): 2H x 1W x 2.5L
                                     (5W8-30 + PCB1B Base)
  • Weight: 1 oz
Technical Specification

Surge Suppression Products
Contact our support department about your Surge Protection product.

Telephone: +1 607 721 8840
Toll-Free: +1 800 288 6169

Contact Support