Hybrid and Renewable Energy


PRODUCTS
Emerson Network Power > CALA > Products > By Type > Renewable And Hybrid Energy

Intelligent products that integrate multiple energy sources such as solar, wind, fuel cells, battery, generator and utility power configured for your application and designed to maximize energy savings, support environmental sustainability and provide advanced management within your network infrastructure. 

NetSure 701 is based on a concept with modular building blocks designed to meet present and future capacity and functionality needs.
A SIECOR Network Interface Line Module with built-in secondary surge protection.
Available with surge current ratings up to 25kA per mode or 50kA per phase.  Protects connected equipment against electric power line disturbances and transients in low exposure locations.
Available with surge current ratings up to 80kA per mode or 160kA per phase.  Protects connected equipment against electric power line disturbances and transients in medium exposure locations.
A compact, non-modular design with surge ratings up to 50kA per mode or 50kA per phase. Includes LED status inducation, summary alarm contacts, and is housed in a weather resistant enclosure.
The 425 uses thermally protected MOVs, is designed in a NEMA 4X enclosure, and is tested as a UL 1449 Type 1 device, so it can be placed on the line or load side of the main disconnect.
A surge protective device that offers high-end surge capability at a competitive price. The 430 uses thermally protected MOVs, provides EMI/RFI filtering in a package that focuses on basic features and reliable performance.
A non-modular, surge protective device that incorporates the same design platform as the 460 SPD; high-energy capable, thermally protected large block MOVs and a similar assortment of accessories.
A modular surge protective device capable of diverting high-energy transients. The 460 incorporates either single or dual modules that contain multiple, large block MOVs.
A modular or non-modular line available at surge current ratings up to 250kA per mode or 500kA per phase offering continuous protection from damaging transients and electrical line noise.
A
 modular design with available surge current ratings from 160kA to 1000kA per phase.
Provides facility-wide surge suppression and EMI/RFI filtering at service entrance and distribution panels.
A true hybrid device offering a coordinated multi-stage system of suppression, integrating the fast response time of the SAD (Silicon Avalanche Diode) modules with the high-energy capability of the MOV modules. S
uperior clamping at surge current ratings up to 375kA per mode or 750kA per phase. 
Control units that provide detailed information about the DC power system’s functions and batteries by means of a graphical display.
Control units that provide detailed information about the DC power system’s functions and batteries by means of a graphical display.
Battery monitoring system that continuously monitors and diagnoses all critical battery parameters for large UPS systems. It can monitor up to 256 cells per string. It identifies potential problems by continuously monitoring parameters such as cell voltage, overall string voltage, current and temperature. Tracking and reporting allow proactive action in replacing a bad battery before it affects others in the string.

AMS Intelligent Device Manager is an advanced monitoring tool for preventive maintenance. In predicting necessary maintenance activities, AMS allows customers to have a proactive rather can reactive approach to problems that impact the process. Best used in the Oil & Gas (Upstream and Downstream) and Continuous Process sectors.

A comprehensive system that provides an integrated lightning protection solution.
Aligns business forecasts with the current state and consumption trends for the infrastructure based on analysis of historical usage patterns to help IT proactively manage data center capacity and economically plan expansion and consolidation.
Aligns business forecasts with the current state and consumption trends for the infrastructure based on analysis of historical usage patterns to help IT proactively manage data center capacity and economically plan expansion and consolidation.

Aligns business forecasts with the current state and consumption trends for the infrastructure based on analysis of historical usage patterns to help IT proactively manage data center capacity and economically plan expansion and consolidation.

Single source for reporting and analytics on the data center infrastructure offering visual management of the equipment, space, power, cooling and port connectivity. It automates management processes as they relate to the data center and integrates the required data into the organization's overall configuration management database.

Single source for reporting and analytics on the data center infrastructure offering visual management of the equipment, space, power, cooling and port connectivity. It automates management processes as they relate to the data center and integrates the required data into the organization's overall configuration management database.

Monitors the status and impact of the critical infrastructure through a unified view of the data center. It provides a vendor-independent monitoring platform, which interfaces with the broader enterprise monitoring systems to provide monitoring of the data center with an IT perspective.
Monitors the status and impact of the critical infrastructure through a unified view of the data center. It provides a vendor-independent monitoring platform, which interfaces with the broader enterprise monitoring systems to provide monitoring of the data center with an IT perspective.
Aggregates and normalizes real-time data from disparate systems, devices and facilities to compute a risk-adjusted value that represents the actual load on resources. Using this actionable operational information, IT can better maximize utilization and improve efficiency.​​​​​​​​
Aggregates and normalizes real-time data from disparate systems, devices and facilities to compute a risk-adjusted value that represents the actual load on resources. Using this actionable operational information, IT can better maximize utilization and improve efficiency.

Aggregates and normalizes real-time data from disparate systems, devices and facilities to compute a risk-adjusted value that represents the actual load on resources. Using this actionable operational information, IT can better maximize utilization and improve efficiency.

Provides a standardized web services interface so that organizations can integrate Aperture solutions with other IT management systems and the broader ITSM framework. This solution includes a SOAP-based integration layer and tools, support for data- and process-driven interfaces to Aperture solutions and upgradeable, transaction-driven architecture to reduce the cost of ownership.

Provides a standardized web services interface so that organizations can integrate Aperture solutions with other IT management systems and the broader ITSM framework. This solution includes a SOAP-based integration layer and tools, support for data- and process-driven interfaces to Aperture solutions and upgradeable, transaction-driven architecture to reduce the cost of ownership.

The 5700 Professional package offers richer features to your monitoring needs. Control up to 64 devices, with even more ‘Power to Know’ capabilities such as reports, trending and diagnostics, along with standard power monitoring devices, remote annunciators and additional 17 inch monitoring servers.
The Enterprise package offers full redundancy features with control of up to 128 devices, all ‘Power to Know’ capabilities, standard power monitoring devices, remote annunciators and additional 42 inch monitoring servers.
PowerQuest 5900 is ideal for complex on-site power systems that support ultra-critical applications such as data centers, large hospitals, financial centers and other operations where the stakes are high.
Get the advantage of combined automatic power switching with the necessary disconnecting, grounding, and bonding required for use as service entrance equipment with the ASCO Series 300SE. The power transfer switch meets all National Electrical Code requirements for service entrance use.
​The ASCO Service Entrance Power Transfer Switch combines automatic power switching with the necessary disconnecting, grounding, and bonding required for use as service entrance equipment. The power transfer switch meets all National Electrical Code requirements for service entrance use.
The Avocent® LRA Console family provides the simplicity, efficiency and ease of use to make it the perfect in data center access point. The LRA line enables ease of access to multiple servers making software upgrades, troubleshooting and system monitoring convenient and less time-consuming.
The ACS 5000 meets the remote management needs of medium to large data centers. The series is available in 4, 8, 16, 32 and 48 ports with a single AC power supply.
The ACS 6000 console servers are Avocent's next generation console manager. They provide secure, remote access to IT devices and UNIX / LINUX-based servers.
Advanced console server functionality encapsulated in a virtual machine. Tapping the direct serial connections of the virtual machine on which it resides, this technology delivers higher availability of servers in even the most complex cloud environment.
The Avocent AMX™ Analog High Performance KVM switch is designed for organizations that need to provide workers the ability to quickly and seamlessly access and share one or more computing resource(s) which are physically separated from their work environment. The Avocent AMX™ Analog High Performance KVM switch uses direct connect technology to provide fast switching between resources.
The Avocent AMX™ Analog High Performance Matrix KVM solution is designed for organizations that need to provide workers the ability to quickly and seamlessly access and share one or more computing resource(s) which are physically separated from their work environment. AMX uses direct connect technology to provide fast switching between resources.
Built for SMB server room environments, this analog KVM switch is used to control and access your servers. Includes advanced features such as virtual media and smart card/CAC authentication.
Avocent AutoView™ digital KVM switches provide access to your servers from any location via the on-board Web browser.
DSR™ digital switches let you remotely manage and power cycle connected devices. Centralize the management of the switches with DSView 4 software.
DSR™ digital switches let you remotely manage and power cycle connected devices. Centralize the management of the switches with DSView 4 software.
Avocent DSView management software delivers the complete data center control necessary for the 24/7 data center.
DSView™ 4 management software delivers the complete data center control necessary for the 24/7 data center.
Avocent MergePoint® EMS allows original equipment manufacturers (OEM) and original design manufacturers (ODM) the ability to implement powerful, remote access and device management functionality on platforms designed to support baseboard service processors.
The Avocent MergePoint Unity™ switch includes both KVM-over-IP and serial console management technology. Centralize the management of the swiches with DSView 4 software.
Rack Power Manager can manage enterprise size PDU deployments with ease, providing access and control capabilities to maintain and configure your PDUs.
Rack Power Manager can manage enterprise size PDU deployments with ease, providing access and control capabilities to maintain and configure your PDUs.
Streamlined access for two to four computers through a single keyboard, monitor and mouse. Available in an attractive console that occupies a space smaller than a keyboard. The Avocent SV200 series supports single monitor configurations for DVI-I, Display Port and HDMI
Streamlined access for up to four computers through a single keyboard, monitor and mouse. Available in an attractive console that occupies a space smaller than a keyboard. The Avocent SV300 series supports dual monitor configurations for DVI-I, Display Port and HDMI.
Simultaneous access for two to four computers through a single keyboard, and mouse. Includes productivity features that enable faster access to critical data. Available in an attractive console that occupies a space smaller than a keyboard.
Cost-effective, digital KVM switches that provide access to and control of servers
Single-user Avocent SwitchView™ analog KVM switches provide users, looking for a cost-effective solution, PS/2 and/or USB connectivity and target devices in SMB server rooms.
​The Avocent® Universal Management Gateway is the first data center appliance that enables true, real-time, integrated monitoring, access and control across IT and facilities systems in the data center.
​​The Avocent® Universal Management Gateway is the first data center appliance that enables true, real-time, integrated monitoring, access and control across IT and facilities systems in the data center.
​The Avocent® Universal Management Gateway is the first data center appliance that enables true, real-time, integrated monitoring, access and control across IT and facilities systems in the data center.
The Avocent® HMX Digital High Performance KVM switch is designed for organizations that need to provide workers the ability to seamlessly access and share one or more computing resource(s) which are physically separated from their work environment. The Avocent® HMX Digital High Performance KVM switch leverages industry standard IP technology and existing network infrastructure to provide sharing and switching between resources separated by large distances.
It’s the next generation of broadcast extension for even more flexible content creation, production and delivery. Soon to be released, this new offering leverages the success of the Avocent® HMX and AMX™ High Performance KVM product lines to create a unified, best-of-breed platform. The Avocent® Matrix Digital High Performance KVM combines the instantaneous switch time of the Avocent AMX™ High Performance KVM system with the digital quality and advanced management features of the Avocent® HMX High Performance KVM system.
Meets a broad range of power distribution requirements for IT and other applications. These basic models offer output distribution in a robust package. Standard and High-Power models available in a variety of configurations.
The battery circuit protection box is used to electrically isolate the battery and to protect the electrical installation from any event that could occur on the battery circuit.
Battery backup systems that hold up to 540Ah at 48VDC or 1080 at 24VDC of batteries and include a DC supplied climate unit.

Chloride Indusrial Power's BMS is a battery monitoring tool for effective management of stand-by battery banks. As such, it helps not only in ensuring the reliability of back-up power systems, but also in minimizing their risk of failure. Best used in the Oil & Gas (Upstream and Downstream), Transmission & Distribution, and Continuous Process sectors.

BRAVO is a compact and scalable inverter providing a pure sine wave AC supply.
Co-location protectors designed for multi-tenant dwelling applications where two telco service providers maintain service to subscribers within the same building.
Chloride 80-NET is a UPS Performance Transformerless more independent in its power range, designed to provide maximum active power, high efficiency and full support for modern critical loads. The Chloride 80-NET combines high performance and reliability with energy efficiency, resulting in an optimized TCO.
Chloride’s 80-NET is the best performing stand-alone transformer-free UPS in its power range, designed to provide maximized active power, high efficiency and complete compatibility for modern, business critical loads.
The Chloride Industrial Power AC Voltage Stabilizer AVR is servo-controlled and is used to keep an AC voltage constant and within a defined tolerance.
The Chloride Cddi is an isolated DC/DC converter which keeps its output DC voltage within the limits accepted by the supplied load.

The CP-60Z is our latest SCR-based industrial UPS with improved efficiency. Best used in the Oil & Gas (Upstream and Downstream), Water Infrastructures, Mining, and Transportation (rail, metro, tramway) sectors.

The CP-70i, formerly known as Exond Apodys, is our flagship industrial DC/AC inverter offering a very high level of customization. Best used in the Oil & Gas (Upstream and Downstream), T&D substations, and Conventional Power Generation sectors.

The CP-70R, formerly known as Excel Apodys, is our flagship industrial rectifier/battery charger offering a very high level of customization. Best used in the Oil & Gas (Upstream and Downstream), Transmission and Primary Distribution substations, Transportation infrastructures, and Continuous process sector.

​​​​

The Chloride CP-70RC is a range of industrial rectifi ers / battery chargers that supplies high DC power in a more compact footprint. It combines the highly reliable thyristor-based topology with the proven digital control technology to offer the best performance under any electrical and environmental conditions.​​

The CP-70Z, formerly known as Excor Apodys, is our flagship industrial UPS offering a very high level of customization. Best used in the Oil & Gas (Upstream and Downstream), and Conventional Power Generation sectors.

The FP-20R industial rectifier/battery charger is compact and flexible thanks to a selection of extras. Best used in the Secondary distribution substations, Process industries, Automatic control systems, Monitoring circuits, and Switching and motorization sectors.

The FP-40R, formerly known as Hexagone, offers exceptional output stability and flexibility to comply with many requirements of the industrial sector. Best used in the Primary distribution substations, Continuous process, Chemical, and Water & Wastewater sectors.

The Chloride FP-60Z is our new Full-IGBT industrial UPS which embeds all latest Technologies. Best used in the Oil & Gas (Upstream and Downstream), Water Infrastructures, Mining, Transportation (rail, metro, tramway), and Manufacturing sectors.
The LIFE™ technology enables remote diagnosticand preventive and monitoring services for Chloride's industrial systems.

The NP-90i, formerly known as Exond, is our industrial DC/AC inverter for the Nuclear Power Generation sector.

Chloride Trinergy is a revolutionary high power UPS with dynamic mode transitioning, scalability up to 9.6 MW and 99% efficiency. It delivers optimum performance and reliability with a dramatically reduced total cost of ownership (TCO).

The Chloride XP Range Products are tailor-made solutions designed to operate in hazardous atmosphere and meet the requirements of the ATEX/IECex standards.​​

Cabinets that integrate generator receptacles, load centers, surge suppression and telco demarcation into one unit, saving space.

Containerized Infrastructure Solutions from Emerson are used for a variety of applications in industries such as oil & gas, mining, military, optical networks, telecommunications, signaling, and data networks.

Designed to protect sensitive electronic equipment from damage due to excessive voltage or currents generated by lightning or static build-up.
Three-stage hybrid protectors for low voltage data and telecommunications applications.
Surge suppressor designed to protect AC distribution panel circuits or 120V power supplies feeding sensitive electronic equipment.
The Edco MOD-12 combines AC and Tip/Ring protection for Key/PBX Systems into one attractive, compact assembly. This innovative design creates an automatic ground window, thus eliminating the problem of ground potential difference.
A "suitcase style" TVSS tester designed exclusively for the Traffic Signaling industry.
Plugs into test points on HCO, HDE, and HAE, as well as other EDCO 66-Block Protectors.
A view into energy consumption, plus data center inefficiencies.
Complete management of your data center's power system.
​​Full tracking and reporting on the health of your devices.
Full tracking and reporting on the health of your devices.
A stand-alone site monitoring unit that provides remote monitoring of energy equipment and the telecom site environment with its powerful functionality, facilitating easy maintenance and management of the site.
A stand-alone site monitoring unit that provides remote monitoring of energy equipment and the telecom site environment with its powerful functionality, facilitating easy maintenance and management of the site.
Our Energy Operations Centers are an integrated approach to managing the energy and health of entire networks. That includes remote monitoring, optimizing energy consuming equipment, regular remote maintenance routines and emergency service in a single package, designed to minimize energy use and maximize the availability of vital systems.
Supervison modules that are used for General IO, Battery management and AC management applications.
A reliable power supply system integrating DC power with hybrid power sources that offers site management and integrated control of renewable and Standard energy sources within a quality outdoor cabinet or indoor subrack system. 

The IEC 61850 compatibility kit connects the Chloride CP range to the world-wide accepted communication protocol for electrical devices.

An Active Tracking Filter® that plugs into a standard duplex receptacle. It features uniquely designed repositionable outlets for easy installation behind desks and other furniture. It protects sensitive home or office equipment from damaging power disturbances traveling through wiring to electrical outlets.
Autochangeover controllers are ideal for coordinated control of systems with redundant data center infrastructure equipment, such as multiple environmental units or pumps. When the controller detects an alarm in an operating device, a standby device is enabled and the device in alarm is either disabled or left operating as configured.
​The Liebert® AFC adiabatic freecooling chiller combines three key cooling technologies: adiabatic, freecooling and mechanical cooling.
The row-based Liebert APM is a transformerless, on-line UPS that allows quick and easy capacity increases with FlexPower™ hardware assemblies - no additional floorspace required. The UPS operates with the industry's highest efficiency - up to 94% at loads of 50-100%.
The compact, modular Liebert APM is a transformerless, on-line UPS that allows quick and easy capacity increases with FlexPower™ hardware assemblies - no additional floorspace required. The UPS operates with the industry's highest efficiency - up to 94% at loads of 50-100%
The Liebert APS UPS is a modular power protection solution for 5 – 20kVA applications. The UPS provides mission-critical availability while reducing costs and maintaining flexibility for the future.
Provides high refrigerating power in a small environment.

Liebert Challenger 3000 with Liebert iCOM controls provides complete control of temperature, humidity and air filtration. Liebert iCOM controls enhance system performance, and allow Liebert Challenger 3000 systems to communicate and work as a team. This data center solution offers an extremely compact footprint, ideal for facilities where space is at a premium.

A self-contained data center cooling unit that is ideally suited and designed for cooling server rack cabinets in small and medium data centers. Liebert CRV features Liebert iCOM controls and a digital scroll compressor, for high reliability and optimized data center heat management.

The Liebert CW data center cooling system is specifically designed to handle the high heat loads generated by computers and other electronic equipment, using an existing building chiller as a source of chilled water cooling. Liebert iCOM controls and a variety of energy efficient features combine to ensure reliable, economic data center management.
Designed for year-round temperature and humidity control and air filtration in areas where people and electronics must occupy the same space. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Designed to be mounted to the Liebert DataMate evaporator units, making a self-contained cooling unit.
Efficient, precise, reliable control of room temperature, humidity and airflow for proper operation of critical electronic equipment and optimal data center design. The flexible Liebert DS offers high energy efficiency, user-friendly Liebert iCOM controls, modular frame, front service access, and compressor options.
Easily installed in selected Liebert precision cooling systems to provide contact closure monitoring and reporting of system operation. The unit provides contact closure outputs, and reports status and major alarm conditions to an existing Building Management System, I/O or alarm panels, and autodialer devices.
True on-line, double conversion, three-phase UPS system is the right solution to support a maximum efficiency data center design. It provides high operating efficiency, high power capacity, and low PUE and TCO. Features a small footprint, and a large 10.4” control touch screen. Capacity-on-demand without additional footprint. Single module and 1+N Distributed Bypass available.​​​​​​​
Integrate power distribution into the rack environment, with the rack-sized Liebert FDC. The stand-alone cabinet blends physically and cosmetically with rack equipment, while offering the distribution capabilities of a much larger unit.

Air-cooled condensers precisely matched to the heat rejection requirements of Liebert data center cooling and fluid chiller systems.

Provides higher quality, more flexible power distribution for high-density data centers. It is engineered to combine the convenience and cost savings of a pre-packaged, factory-tested unit with the flexibility of a custom-tailored power system. This self-contained system provides power isolation, power distribution, computer-grade grounding and power monitoring.
Liebert GXT3 true on-line uninterruptible power system (UPS) combines low cost of ownership with rich functionality, small size and high capacity. The UPS offers internal batteries, optional external batteries, and internal bypass capability, resulting in continuous uptime for the connected equipment.
Liebert GXT3 5 kVA to 10 kVA UPS systems provide true on-line protection in the smallest cabinets in their capacity range. These Uninterruptible systems offer internal batteries, unlimited extended external batteries, and internal bypass capability, resulting in continuous uptime for the connected equipment. Multiple power output configurations allow quick connection of protected loads.
The solid-state digital bus transfer switch is the enabling technology behind multi-bus power systems.
High performance condensers suitable for R407C and R22 refrigerants. Dissipates the heat coming from air-cooled direct expansion indoor units. Available in a wide range of sizes, from 5kW to 100kW cooling capacity.
Liebert HPF units are designed for indoor and floor-mount application with over-under or displacement air delivery.
Cabinet air conditioners designed to be used with Liebert HPC.
Cabinet air conditioners with direct expansion and chilled water technologies.
Units that make the most of low winter temperature, saving electrical power of compressors.
Incorporates the whole experience of Emerson Network Power in a unique range of cabinet air coolers suitably designed to ensure performance and reliability.
High performance split air conditioner units with capacity from 06-14kW.
The Liebert iCOM control system featured on Liebert Precision Cooling products brings high-level supervision to multiple units, allowing up to 32 cooling units to work together as a single system to optimize room performance.
Designed for the physical needs of industrial sites, with rugged and serviceable components to ensure continuous operation. Liebert ICS provides additional durability and higher capacity for applications where cooling and air delivery needs are greater than conventional air conditioning systems can handle.
Designed for year-round cooling of remote shelters. The small, lightweight, self-contained unit is easy to install and maintain. These rugged systems have a variety of options to address energy efficiency and redundancy.
Provides contact closures for remote monitoring of alarm conditions of Liebert UPS systems equipped with an Intellislot communication port. The card delivers On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals to relay contact monitoring systems. The card is user-installable and hot-swappable.
Delivers SNMP, Telnet and web-management capability for enhanced communications and control of Liebert UPS, Power Management or Precision Cooling systems. The card manages a wide range of operating parameters, alarms and notifications, transmitting data over the network.
Liebert ITA Series is a full featured scalable UPS designed to provide long backup time for small computer rooms and network equipment.
This Two-channel leak detection provides data center monitoring for two different areas with direct-read at the control unit location, as well as the ability to communicate with Liebert SiteScan Web centralized monitoring system or a building management system.
These Point detection modules install quickly and work simply for reliable warning of potentially hazardous moisture leaks at critical points under a raised floor. A simple two-wire connection signals the alarms to a Liebert environmental unit monitor panel or at another monitoring panel.
These zone leak detection sensor modules install quickly and work simply for reliable warning of potentially hazardous moisture leaks. The supervised zone leak detector uses up to 100 feet of flexible Liebert moisture sensing cable, offering protection for hard to reach spots and sensitive areas that require protection against leaks.
This Leak detection cable is designed for use with Liebert Liqui-tect two-channel leak detection and reporting system, and Liebert LT460 zo​ne leak detection sensors. The memory-resistant flexible cable is easy to install, and it includes mating connectors for quick extension or connection to the reading unit. Multi-wire design provides precise signaling.
Liebert MB Busway provides high density power distribution to the rack while eliminating cable clutter that can reduce airflow. This modular system is easy to install, and is easily expanded with a variety components in configurations to meet unique site needs. Available in high density and standard configurations.
Designed to be used in conjunction with the Liebert Mini-Mate2, Liebert DataMate and Liebert Challenger 3000 evaporator units.
A rack enclosure with integrated cooling and optional UPS protection, designed to ensure the long-term viability of IT equipment or other critical electronics.
Allows manual transfer of connected equipment to utility power via a maintenance bypass switch, permitting scheduled maintenance or UPS replacement without power disruption.
Designed for precision cooling, humidity control and air filtration of small areas, such as computer, control and equipment rooms. The Liebert Mini-Mate2 installs above a dropped ceiling, is easy to install and service, and requires only front access for maintenance.
Designed to distribute and manage power within network cabinets and server racks. Models are available with remote monitoring and/or control capabilities for power distribution at the load/equipment level.
Automated shutdown software that perfectly complements a Liebert UPS system, preventing unexpected server shutdowns and minimizing downtime. The software provides unattended, orderly shutdown for one computer or many, and is especially effective with large server farms. Available for most popular operating systems, Liebert MultiLink has full event management and displays UPS instrumentation on screen.
Designed for use with workstations, servers, networks, telecommunications equipment or other sensitive electronics.
Liebert Nform centralized infrastructure monitoring software solution provides data center monitoring of equipment for companies of every size. It provides network management of distributed Liebert equipment with notifications and messaging, with software versions available to meet business needs.
Liebert Nform centralized infrastructure monitoring software solution is designed to monitor data center support equipment for companies of every size. It provides network management of distributed Liebert equipment with notifications and messaging, with software versions available to meet business needs.
Liebert Nform centralized infrastructure monitoring software solution provides data center monitoring of equipment for companies of every size. It provides network management of distributed Liebert equipment with notifications and messaging, with software versions available to meet business needs.
Features one of the industry’s smallest footprints in a full-featured, high power UPS system. All-digital controls allow for ultra-fast adjustments to changing loads. The Liebert Npower is rugged enough to handle load branch faults, input faults, 100% step loads, PDU startup inrush and motor-load startup.
Mid-sized, three-phase UPS system that delivers complete, centralized power protection for mission-critical systems. Designed to meet the high availability power needs of a wide variety of IT applications, the UPS combines compact size, advanced operating features and low cost of ownership.
True on-line, double conversion, three-phase UPS system with Softscale™ technology  that provides a scalable solution to optimize data center power design. Uninterruptible power can grow from 40 to 60 to 80 kVA, from 80 to 100 to 120 kVA, and from 160 to 200kVA. The UPS may also be paralleled for additional capacity or for redundant operation.
True on-line, double conversion, three-phase UPS system with Softscale™ technology  that provides a scalable solution for growing data centers. The UPS allows growth from 40 to 60 to 80 kVA, and from 80 to 100 to 120 kVA. The UPS may also be paralleled for additional capacity or for redundant operation.
Provides reliable power protection and advanced technology for high power applications. It offers excellent dynamic performance, with the ability to handle virtually any input condition while still providing computer grade output to critical loads.
An efficient, space saving and flexible solution for your network. With an above industry standard efficiency rate of up to 94% in a compact, low footprint UPS, Liebert NXr keeps your network protected while saving on cost and data center space.
An efficient, space saving and flexible solution for your network. With an above industry standard efficiency rate of up to 94% in a compact, low footprint UPS, Liebert NXr keeps your network protected while saving on cost and data center space.
An efficient, space saving and flexible solution for your network. With an above industry standard efficiency rate of up to 96% in a compact, low footprint UPS, Liebert NXr keeps your network protected while saving on cost and data center space.
An efficient, space saving and flexible solution for your network. With an above industry standard efficiency rate of up to 96% in a compact, low footprint UPS, Liebert NXr keeps your network protected while saving on cost and data center space.
This compact, half-duplex device provides data center monitoring for temperature, humidity, water detection and contact closure and notifies personnel when those conditions exceed user-defined limits.
Provides closed system data center cooling for pumped glycol heat-transfer fluid.
A result of extensive research and development, conducted with leading environmental control experts, consultants and major corporations. A wide range of standard units (both 50Hz and 60Hz) are offered from 20kW to 100kW in both air-cooled & water-cooled versions. Downflow & Upflow configurations available with factory matched condenser to meet specific customer requirement.
The energy efficient precision cooling units offer enhanced control, low footprint, and centralized management.
Designed to be used in conjunction with the Liebert Mini-Mate2, Liebert DataMate and Liebert Challenger 3000 evaporator units.

Power conditioning and distribution cabinet that offers the benefits of a custom-tailored system, with the convenience and cost savings of a pre-packaged, factory-tested system. Housed in a single, self-contained cabinet, it combines distribution, computer-grade grounding, isolation, and power monitoring to provide the protection your vital computer or communications equipment demands.

Power conditioning and distribution cabinet that offers the benefits of a custom-tailored system, with the convenience and cost savings of a pre-packaged, factory-tested system. Housed in a single, self-contained cabinet, it combines distribution, computer-grade grounding, isolation, and power monitoring to provide the protection your vital computer or communications equipment demands.
Economical line-interactive UPS that offers full-featured power protection for small office computers and electronic equipment. Liebert PSA offers unique features and extraordinary performance not normally found in similar products in this price range.
This compact, line-interactive UPS system is designed especially for IT applications such as network closets and small data centers. It provides reliable power protection for servers, critical nodes, network workstations, large network peripherals, network routers, bridges, hubs and other electronic equipment. Matching battery cabinets are available to extend the on-battery operating time.
Economical, full featured UPS that delivers cost-effective power protection in a compact package. The UPS provides battery-backed outlets and a surge protection-only outlet. The UPS battery offers four minutes of backup power at full load — ample time to shut down protected equipment if an outage occurs.
Surge protection strips that provide computer grade power, protecting connected equipment from the damaging effects of lightning, spikes, surges, and other power quality problems.
Displays customized alarm indication for any dry contact input from environmental, power and UPS systems, including Liebert units. This remote system continuously surveys your most critical support equipment and instantly alerts you to alarm conditions. The unit monitors up to four digital inputs.
This panel displays customized alarm indication for any dry contact input from environmental, power and UPS systems, including Liebert units. This remote system continuously surveys your most critical support equipment and instantly alerts you to alarm conditions. The unit monitors up to four digital inputs.
Liebert RDC remote distribution cabinet extends the functionality of the PDU by packaging 168 poles (four complete panelboards) in a stand-alone cabinet with the smallest possible footprint.
Rack performance monitoring device designed to monitor the environment in electronic equipment racks and rooms through various types of sensors and cameras. The unit can accommodate multiple sensors; it can also be used for remote notification such as activating a beacon light to report problems.

The Liebert RX remote power distribution cabinet supplies packaged power distribution in the smallest possible footprint, with 400 Amp and 84 poles in one panelboard, and only requiring 24”x12” of space.

Designed to protect large-scale, mission-critical applications from the full range of power quality problems and outages. The space effective system is also extremely energy efficient, with an operating efficiency of up to 94%. Field-proven reliability and multiple configuration options make Liebert Series 610 an industry leader in power protection.
Provides Liebert air-cooled data center cooling units with special heat rejection options. They are designed for applications where an outdoor heat rejection location is not practical, such as high-rise buildings or areas with restricted access.
Provides closed system cooling for pumped glycol heat-transfer fluid. They are designed for applications where an outdoor heat rejection location is not practical, such as high-rise buildings or areas with restricted access.
Liebert SiteScan allows monitoring and control of virtually any piece of critical support equipment — whether located in the next room or in a facility on the other side of the country. This web-based data center monitoring system provides centralized oversight of Liebert precision air, power and UPS units, as well as many other analog or digital devices. Features include real-time monitoring and control, data analysis and trend reporting, and event management.
Liebert SiteScan allows monitoring and control of virtually any piece of critical support equipment — whether located in the next room or in a facility on the other side of the country. This web-based data center monitoring system provides centralized oversight of Liebert precision air, power and UPS units, as well as many other analog or digital devices. Features include real-time monitoring and control, data analysis and trend reporting, and event management.
Allows monitoring and control of virtually any piece of critical support equipment — whether located in the next room or in a facility on the other side of the country. The web-based system provides centralized oversight of Liebert precision air, power and UPS units, as well as many other analog or digital devices. Features include real-time monitoring and control, data analysis and trend reporting, and event management.
Provides automatic, seamless transfer between critical load and the outputs of two independent UPS systems in a dual-bus power configuration. If the primary UPS should fail, the switch will automatically transfer the loads to the alternate UPS.
Provides power distribution and automatic switching between two different AC power sources.
Point-of-use transfer switch ideal for applications requiring reliable dual AC power switching.
Provides centralized power distribution for 24VAC loads with two independently fused 40VA isolated outputs. The TM115 and TM230 transformer modules are designed as self-contained, stand-alone devices.
This solution provides centralized power distribution for 24VAC loads with two independently-fused 40VA isolated outputs. The TM115 and TM230 transformer modules are designed as self-contained, stand-alone devices.
Temperature and humidity sensors provide accurate sensing of room temperature and humidity, transmitting the data via 4-20 mA output signal to the Liebert Universal Monitor.
These temperature and humidity sensors provide accurate sensing of room temperature and humidity, transmitting the data via 4-20 mA output signal to the Liebert Universal Monitor.
Precision cooling systems designed specifically to cool electronic equipment.
Microprocessor with multi-sensing, remote monitoring and remote control capabilities. Its advanced technology provides high-availability monitoring around the clock. The Universal Monitor can operate as an independent, stand-alone controller or in conjunction with Liebert SiteScan Web centralized monitoring system.
This solution is a microprocessor with multi-sensing, remote monitoring and remote control capabilities. Its advanced technology provides high-availability data center monitoring around the clock. The Liebert Universal Monitor can operate as an independent, stand-alone controller or in conjunction with Liebert SiteScan Web centralized monitoring system.
Network switch that interconnects cooling units equipped with iCOM controls, allowing the units to communicate and function as a team, and allowing lead/lag operation.
Network switch that interconnects cooling units equipped with iCOM controls, allowing the units to communicate and function as a team, and allowing lead/lag operation.
Prefabricated distribution piping that is installed in anticipation of a growing cooling system. Liebert XD Cooling Modules are added, disconnected, or repositioned as required and are quickly made operational with flexible connection piping and quick-connect fittings.
Liebert XDP and Liebert XDC are system matched pumping units, designed to support Liebert XD System spot/zone cooling modules. The indoor pumping units circulate the refrigerant to the cooling modules at a temperature always above the actual dewpoint to prevent condensation.
Liebert XD refrigerant-based cooling modules work as a system to support the hot aisle/cold aisle approach to cooling high heat density data centers. The modules provide focused rack cooling, enhancing a room precision cooling unit, such as a Liebert DS system. Pumped refrigerant is ideal for use around electronic equipment, operating at low pressure in the piping circuit, and becoming a gas at room conditions.
Works as a system with Liebert XDP-W Coolant Pumping Unit to supply cooling water to high heat density racks. The modules offer an alternative to critical applications where the hot aisle/cold aisle approach to cooling is not practical.
A secured enclosure with integrated high heat density cooling, providing the benefits of big room support in a cost-effective package. Optimized horizontal air circulation cools the protected equipment, both in standard mode and in the backup ventilation mode.
Houses the isolating heat exchanger between the Liebert XDR-W or Liebert XDK-W and the building chilled water. It circulates the chilled water to the cooling modules at a temperature always above the actual dew point to prevent condensation.
Associated with AC or DC UPS systems, the Low Voltage Distribution panels are provided as a key part of our power protection solutions.
A series-connected high-frequency noise filter with transient protection.
The MEDIA 6000VA is a parallelable, rack-mounted inverter system that provides a pure AC sine wave output at 120 or 240Vac (60 or 50Hz) with a THD <3% for any kind of load.
Liebert MPH is a flexible Rack PDU - a perfect solution for growing IT operations. The PDU offers control to the receptacle level, as well as monitoring of the strip and environmental input options, such as rack temperature and humidity. Liebert MPH offers the industry's leading operating temperatures, ensuring availability even in the harsh environment at the back of the rack.
The most intelligent, high-availability line of managed rack PDUs. It offers remote monitoring and control capabilities as well as environmental input options, with multiple power input selections and output configurations.
MPX is the most responsive and adaptive rack PDU available. With MPX rack PDU technology, you can respond to rack equipment changes and dynamic capacities by leveraging hot-swappable modular output power, hot-swappable modular communications and modular input power.​
Outdoor-rated, self-contained building entrance protector for indoor or outdoor applications, with no need for additional enclosures.

NetSure™ 211, the next generation of mini systems, is the perfect solution to smaller access nodes, such as street cabinets and other outdoor solutions where not only minimal space is valued, but also the systems ability to deliver power in the most reliable way also under tough environmental conditions, such as very high or very low temperature.

NetSure™ 211, the next generation of mini systems, is the perfect solution to smaller access nodes, such as street cabinets and other outdoor solutions where not only minimal space is valued, but also the systems ability to deliver power in the most reliable way also under tough environmental conditions, such as very high or very low temperature.

NetSure 501 system is optimized for base station power applications as well as other applications requiring up to 8.5kW of DC power.

NetSure 501 system is optimized for base station power applications as well as other applications requiring up to 8.5kW of DC power.

NetSure™ 700 A50 units are DC systems optimized for rural telecom networks, access networks, 2G and 3G base stations, transmission relay stations, microwave and satellite communication stations, and other applications requiring up to 11 kW of +24V DC power.
NetSure 701 is based on a concept with modular building blocks designed to meet present and future capacity and functionality needs.

Introducing NetSure™ 801, a large DC power system in Emerson Network Power’s successful NetSure™ family. With NetSure™ 801, a new "best-in-class" DC power system has been created for all -48V telecom and data centers.

Data center-optimized row-based 48V DC UPS that is designed to support the move to higher efficiency, density and flexibility enabled by row-based power and cooling.
Data center-optimized row-based 48V DC UPS that is designed to support the move to higher efficiency, density and flexibility enabled by row-based power and cooling.
Solutions designed to ensure environmental stability for sophisticated electronic equipment.
NOVA is a compact and scalable inverter providing a pure sine wave AC supply.
Battery backup systems that hold up to 540Ah at 48VDC or 1080 at 24VDC of batteries and include a DC supplied climate unit.
Units that integrate power distribution and TVSS equipment into one solution.
The DMK Series of Transient Voltage Surge Suppressors (TVSS) provides fast, reliable protection for AC circuits. With small footprint, the DMK Series allows easy installation in almost any environment, notably in critical distribution panel to protect all down-line equipment.
The PPVis (PowerProtect VISion) is a PC-based software package for a deep insight and analysis of the industrial range of DC battery chargers, DC/AC inverters and AC uninterruptible power systems.
Standard Control Units provide detailed information about the DC power system’s functions and batteries, by means of a graphical display on site.
Standard Control Units provide detailed information about the DC power system’s functions and batteries, by means of a graphical display on site.
The battery is an essential part of the Uninterruptible Power Supply system however, depending on the final application, batteries of different types and autonomies can be suitable. Thanks to our expertise and knowledge, we can recommend and procure the best battery solution for any type of project.
Optional supervison modules that are used for General IO, Battery management, and AC management applications.
Cabinets that are used for indoor and outdoor telecom applications.
Transient Detection System, surge protection, AC power, surge suppression, monitoring, metering, meter, Emerson, Emerson Network Power, transient, power quality, PQ management
The ultimate tool for keeping track of all of your assets.
The Trellis™ Mobile Suite will eliminate note taking, reduce the chance of errors through re-entering of data, increase staff efficiency and reduce time spent on audits. The Trellis™ Mobile Suite extends the real-time capabilities of the Trellis™ platform while physically being located in the data center.
The Trellis™ Platform Express Edition provides an out-of-the-box DCIM solution with the same features, functions and benefits as those found in the Trellis™ platform...just simplified.
Complete management of your data center's power system.
Power System Manager enables control of the entire data center power system, all the way from the utility entrance down to rack power distribution. The module provides a comprehensive view of resource utilization and capacity, with awareness of the active power path and the status of each device in the power system. 
The Trellis™ Process Manager workflow is designed to help the organization work more efficiently while reducing the risks associated with changes in the data center. 
Full tracking and reporting on the health of your devices.
The Trellis platform represents a groundbreaking innovation from Emerson Network Power – one that leverages the entire breadth and depth of our full offering, from asset, power, cooling design and management solutions to embedded server firmware and management capabilities.
The ultimate tool for keeping track of all of your assets.​
The Trellis™ Asset Management Solution provides software and services in a complete package tailored to exactly meet today’s business needs, and able to scale as your needs grow. ​​
The Trellis™ Capacity Planning Solution provides software and services in a complete package, - tailored to meet your business needs and scalable to meet future needs. With this solution you can determine if existing hardware is meeting the company’s current needs, and provide a projection for future requirements.
The Trellis™ Data Center Monitoring Solution provides software, hardware, and services for monitoring in a comple​te package. ​
The Trellis™ Energy Management Solution enables you to manage the data center with a centralized solution, quickly and in a cost effective manner.​

The Trellis™ Platform Express Edition provides an out-of-the-box ​DCIM solution with the same features, functions and benefits as those found in the Trellis platform...just simplified.

Complete management of your data center's power system.​​​
Full tracking and reporting on the ​health of your devices.​
Provides thermal management for the dynamic and often complex data center environment.​​​​​​​​
This transformerless, modular, on-line UPS supports high power data center loads with three levels of dynamic Energy Optimization Modes, providing up to 99% energy efficiency depending on incoming power quality. The UPS also offers three dimensions of modularity - internal module redundancy, horizontal scalable capacity, and paralleling for capacity.

The VEDA 600VA is a ‘True Redundant System’ with disconnection capability. It is equipped with a converter that has no less than 3 disconnecting levels in series (i.e. electronics, relay and fuse) on its DC power port, as well as an optical isolation on the double communication bus.