Emerson | Firetrol FTA1100-H Diesel Engine Fire Pump Controller

 
PRODUCTS

Emerson Network Power > Products > Fire Pump Controllers > Diesel Engine Fire Pump > Firetrol FTA1100-H Diesel Engine Fire Pump Controller

Firetrol FTA1100-H Diesel Engine Fire Pump Controller

Automatic and Manual Mark II-Based Fire Pump Controllers

Start and monitor fire pump diesel engines in Class1, Division 2 hazardous locations with Firetrol® FTA1100H combined automatic and manual Mark II based diesel engine fire pump controllers.

Product Information/Sales
Brochures and Data Sheets
Overview
Firetrol® FTA1100H combined automatic and manual Mark II based diesel engine fire pump controllers are intended for starting and monitoring fire pump diesel engines in Class1, Division 2 hazardous locations. The controllers have a temperature rating of T3. They are available for use with 12 or 24 volt negative ground systems using lead acid or Nickel-Cadmium batteries, and available with 10 or 20 amp charging circuits. The controller monitors, displays and records firre pump system information.
 

Firetrol fire pump controllers are listed by Underwriters’ Laboratories, Inc., in accordance with UL1604, Electrical Equipment for Use in Class 1 and II, Division 2, and Class III Hazardous (Classifi ed) Locations and UL698, Industrial Control Equipment for Use in Hazardous (Classified) Locations. They are built to meet or exceed the requirements of NFPA 20, Installation of Centrifugal Fire Pumps, and NFPA 70, National Electrical Code.

The Firetrol Mark II provides superior ease of operation and a greater range of options. Our common look and feel between the diesel and electric interfaces means reduced training time for operators of multiple installation applications. The ability to scroll through date stamped recorded data in steps of 1, 10, or 100 events allows users to quickly locate an event when doing diagnostics. And the Mark II's communications capabilities - supporting ModBus and other protocols - offers connectivity to a wide array of building management systems. The list goes on and on - text messaging instead of LED indicator lights, and the ability to add up to 8 customized alarms.

For immediate information contact your local Firetrol Representative or Firetrol directly at 919-460-5200.

Features

The Firetrol Mark IIXG fire pump controller monitors, displays and records fire pump system information. The system is standard on all diesel engine fire pump controllers. A USB Host controller and port are also included as standard.

The door mounted display/interface panel featuring a 128 x 64 ppixel backlit LCD Graphical Display, Membrane Type User Control Push-butoons and easy to read LED Indicators for:

  • AC Power Available
  • Alarm
  • Main Switch In Auto
  • Main Switch In Manual
  • System Pressure Low
  • Engine Running
  • Engine Fail To Start
  • Engine Temperature High
  • Engine Oil Pressure Low
  • Engine Overspeed
  • Engine Alternate ECM
  • Engine Fuel Injector Malfunction
  • Fuel Level Low
  • Automatic Shutdown Disabled
  • Charger Malfunction
  • Battery #1 Trouble
  • Battery #2 Trouble

Additionally, the controller is constructed with the following features specifically for the C1, D2 application:

  • Top Mounted Enclosure Lifting Brackets
  • Hermetically Sealed Pilot Devices and Relays
  • SIS Type Wiring and Sleeve Type Wire Markers
  • Stainless Steel Back Pan
  • Door Stop Bracket (Holds door in open position)
  • Enclosure Gland Plate
  • ECD Drains (To drain accumulated condensate)
  • External White Nameplates with Black Nomenclature
  • 6” Base Mounting Legs
  • Door Clamps and Padlock Hasp
Options/Modifications
SPECIAL ENCLOSURES
-G NEMA Type 12 (IEC IP62), Painted Steel ** Unfinished (Not painted, polished or brushed).
MOUNTING LEGS
-N31 Standard 12” Mounting Legs
-N32 Base Mounting Legs 6”
ANTI-CONDENSATION SPACE HEATERS
-H 120 Volt Space Heater
-J 120 Volt Space Heater With Thermostat
-L 240 Volt Space Heater
-M 240 Volt Space Heater With Thermostat
Pressure Transducers, Solenoid Valves, Plumbing
-D 0-600 psi (0-41.4 bars) wet parts for sea water/foam or copper corrosive applications
ALARMS
-AC Additional contacts for remote indication, engine running - 2 sets provided as standard
-AJ Contacts for remote indication, engine overspeed
-AK Contacts for remote indication, low oil pressure
-AL Contacts for remote indication, high water temperature
-AM Contacts for remote indication, engine failed to start
-AN Contacts for remote indication, battery / charger failure
-AP Contacts for remote indication, main switch in manual
-AR Contacts for remote indication, main switch in off
-AS Contacts for remote indication, main switch in auto
-AT Contacts for remote indication, pump room trouble1
-AV Contacts for remote indication, low pump room temperature1
-AW Contacts for remote indication, reservoir low1
-AY Contacts for remote indication, low suction pressure1
-COM Visible low suction pressure alarm, Manual reset only(Includes reset push-button, initiating pressure switch not included)1
-CPL Contacts for remote indication, system 115% over pressure (for use with PLD engines only)
-CTS Built-in low suction pressure alarm panel (Includes selectable auto/manual reset, audible, visible and remote alarms and mounted and wired pressure switch)
-EE Additional contacts for remote indication, engine trouble - 1 set provided as standard
-EF Additional contacts for remote indication, main switch mis-set - 1 set provided as standard
-EH Contacts for remote indication, relief valve discharge1
-EJ Audible & Visible flow meter on alarm1
-EK Contacts for remote indication, flow meter on1 (Requires option -EJ) 
-JR Visible jockey pump running indication
-JT Audible and Visible jockey pump trouble indication
-LC Contacts for remote indication, high fuel level1
-LD Audible & Visible fuel spill alarm1
-LE Contacts for remote indication, fuel spill1 (Requires option -LD)
-LG Contacts for remote indication, reservoir high1
-PE Contacts for remote indication, low system pressure (Pump on Demand) 
MISCELLANEOUS
-AZ Low pump room temperature switch, mounted and wired
-BA 220-240 Volt operation
-EL Series pumping, high zone controller
-EM Series pumping, mid zone controller
-EN Series pumping, low zone controller
-IEC CE Marking with Externally Mounted Wet Parts
-IECI CE Marking (Internal Wet Parts)
-S Tropicalization
-SEI Seismic Certification (in Accordance with IBC)
-USBX External USB Port
-ZPA Customized, annual service display message (factory programmed)
-ZPN Serial Modbus RTU over Ethernet TCP/IP using 5150 Connectivity Module
-ZPM Serial Modbus RTU over 2-wire or 4-wire RS485.

FTA1100-K1 Low fuel level switch, 16" max insertion length2

FTA1100-K1-x High/Low fuel level switch - specify levels/tank dimensions

FTA1100-K2 Low fuel level switch, 25" max. insertion length2

FTAK21 380-480 volt operation (transformer)2

Export papckaging (Wooden crating to conform to IPPC Standards)

1 - Initiating switches by others

2 - Shipped loose for installation by the customer

Product Information/Technical
Firetrol Service Support
Keep mission-critical Firetrol Systems running at optimal levels.

+1 919 462 7105
24 x 7 x 365 respon​se
Learn More