PRODUCTS
Surge Protection

Telecommunications

Telecommunication lines are widely used in highly exposed areas, or in long runs between buildings. Left unprotected at the primary and secondary, the conductors used in telecommunication applications are highly susceptible to transient impulses. Our telecom surge protection products are suitable for primary, secondary, and security applications.
    

Edco MOD-12 Key Systems
The Edco MOD-12 combines AC and Tip/Ring protection for Key/PBX Systems into one attractive, compact assembly. This innovative design creates an automatic ground window, thus eliminating the problem of ground potential difference.
Edco CAT6-5 PoE (Power-over-Ethernet)
Designed to work on Category 5 Power-Over-Ethernet transmission lines as well as Category 6 applications. Ideal for protecting expensive equipment against surges and transients entering a building on exposed transmission lines.
Edco EL-EDS
Suppressor kit intended for installation with electrical switching devices that are connected through a relay contact on typical access control panels.
Edco FAS-1 and Edco FAS-2 Surge Protection
Multi-stage single-pair or two-pair surge suppressors designed for high exposure applications.
Edco SPA-100T
Intended for equipment located in outdoor cabinets exposed to lightning transients.
Edco TER Series Single Pair Low Voltage Zone-Horn-Strobe-Data Surge Protection
Surge suppressor that directly installs onto electronic circuit wiring terminal screws.
Edco PLP-S Series (with NTI Technology)
The PLP series of products provide isolated power loop circuit protection in applications where higher current is required, such as fire alarm and security systems.
Edco Fas-Tel and FAS-31XT
Single-pair telephone or data line protectors that implement advanced two-stage hybrid design.
Edco H Series
Ultra high-speed fused solid-state secondary protectors for KEY/PABX systems.
Edco MGB Ground Rail
Allows Edco’s H-Series, COHP, OPX, PB Series and other similar surge suppressors to access ground when snapped onto the 66MI-50 Punch Down Block.
Edco NET Series Siecor Network Interface Line Module
A SIECOR Network Interface Line Module with built-in secondary surge protection.
Edco OPX Series
These protectors are intended to be used in conjunction with the Edco MGB Ground Rail and a standard MI-50 Punch Down Block.
Edco PB Series
Solid-state protectors for Intercom Extension Pairs. As a new alternative to the “OPX”, the standard Edco intercom protector, the PB adds fusing and a new component layout.
Edco PC2-Tel Two Line Telephone Surge Protection, modular
Solid state, two-line telephone interface protector module.
Edco TBLK Terminating Assembly
A high-density assembly designed to house up to 12 or 25 individual Edco surge protection modules.
Edco TCS-T1 Series (with NTI Technology - Wireless)
Equipment for T1 line protection against damaging transients.