Emerson | Firetrol FTA1100-H Diesel Engine Fire Pump Controller

 
PRODUCTS

Firetrol FTA1100-H Diesel Engine Fire Pump Controller

Automatic and Manual Mark II-Based Fire Pump Controllers

Emerson Network Power > ASIA > Products > By Type > Fire Pump Controllers > Diesel Engine Fire Pump > Firetrol FTA1100-H Diesel Engine Fire Pump Controller
Firetrol® FTA1100H combined automatic and manual Mark II based diesel engine fire pump controllers are intended for starting and monitoring fire pump diesel engines in Class1, Division 2 hazardous locations. The controllers have a temperature rating of T3. They are available for use with 12 or 24 volt negative ground systems using lead acid or Nickel-Cadmium batteries, and available with 10 or 20 amp charging circuits. The controller monitors, displays and records fire pump system information.
 
Firetrol fire pump controllers are listed by Underwriters’ Laboratories, Inc., in accordance with UL1604, Electrical Equipment for Use in Class 1 and II, Division 2, and Class III Hazardous (Classified) Locations and UL698, Industrial Control Equipment for Use in Hazardous (Classified) Locations. They are built to meet or exceed the requirements of NFPA 20, Installation of Centrifugal Fire Pumps, and NFPA 70, National Electrical Code.

The Firetrol Mark II provides superior ease of operation and a greater range of options. Our common look and feel between the diesel and electric interfaces means reduced training time for operators of multiple installation applications. The ability to scroll through date stamped recorded data in steps of 1, 10, or 100 events allows users to quickly locate an event when doing diagnostics. And the Mark II's communications capabilities - supporting ModBus and other protocols - offers connectivity to a wide array of building management systems. The list goes on and on - text messaging instead of LED indicator lights, and the ability to add up to 8 customized alarms.

For immediate information contact your local Firetrol Representative or Firetrol directly at 919-460-5200.

The Firetrol Mark IIXG fire pump controller monitors, displays and records fire pump system information. The system is standard on all diesel engine fire pump controllers. A USB Host controller and port are also included as standard.

The door mounted display/interface panel is rated for NEMA Type 4 applications and features a 80 Character Vacuum Fluorescent Display, Membrane Type User Control Push-Buttons and easy to read LED indication of the following conditions:

  • AC Power Available
  • Alarm
  • Main Switch In Auto
  • Main Switch In Manual
  • System Pressure Low
  • Engine Running
  • Engine Fail To Start
  • Engine Temperature High
  • Engine Oil Pressure Low
  • Engine Overspeed
  • Engine Alternate ECM
  • Engine Fuel Injector Malfunction
  • Fuel Level Low
  • Automatic Shutdown Disabled
  • Charger Malfunction
  • Battery #1 Trouble
  • Battery #2 Trouble

Additionally, the controller is constructed with the following features specifically for the C1, D2 application:

  • Top Mounted Enclosure Lifting Brackets
  • Hermetically Sealed Pilot Devices and Relays
  • SIS Type Wiring and Sleeve Type Wire Markers
  • Stainless Steel Back Pan
  • Door Stop Bracket (Holds door in open position)
  • Enclosure Gland Plate
  • ECD Drains (To drain accumulated condensate)
  • External White Nameplates with Black Nomenclature
  • 6” Base Mounting Legs
  • Door Clamps and Padlock Hasp
Features
SPECIAL ENCLOSURES
-T NEMA Type 3R (IEC IP14), Painted Steel
-E NEMA Type 4 (IEC IP56), Painted Steel
-F NEMA Type 4X (IEC IP56), #304 Stainless Steel,
-FXP NEMA Type 4X (IEC IP56), #304 Stainless Steel, Painted Finish, Unfi nished**
-FD NEMA Type 4X (IEC IP56), #316 Stainless Steel, Unfinished**
-FDB NEMA Type 4X (IEC IP56), 12 Gauge, Seam Welded, #316 Stainless Steel, Polished and Brushed Finish
-FDP NEMA Type 4X (IEC IP56), #316 Stainless Steel Painted Finish
-G NEMA Type 12 (IEC IP52), Painted Steel ** Unfi nished (Not painted, polished or brushed).
MOUNTING LEGS
-N31 Standard 12” Mounting Legs
-N32 Base Mounting Legs 6”
ANTI-CONDENSATION SPACE HEATERS
-H 120 Volt Space Heater
-J 120 Volt Space Heater With Thermostat
-K 120 Volt Space Heater With Humidistat
-L 240 Volt Space Heater
-M 240 Volt Space Heater With Thermostat
-N 240 Volt Space Heater With Humidistat
Pressure Transducers, Solenoid Valves, Plumbing
-B 0-600 psi (0-41.4 bars) wet parts for fresh water applications
-C 0-300 psi (0-21.1 bars) wet parts for sea water/foam or copper corrosive applications
-D 0-600 psi (0-41.4 bars) wet parts for sea water/foam or copper corrosive applications
ALARMS
-AC Additional contacts for remote indication, engine running - 2 sets provided as standard
-AJ Contacts for remote indication, engine overspeed
-AK Contacts for remote indication, low oil pressure
-AL Contacts for remote indication, high water temperature
-AM Contacts for remote indication, engine failed to start
-AN Contacts for remote indication, battery / charger failure
-AP Contacts for remote indication, main switch in manual
-AR Contacts for remote indication, main switch in off
-AS Contacts for remote indication, main switch in auto
-AT Contacts for remote indication, pump room trouble (common alarm)1
-AV Contacts for remote indication, low pump room temperature1
-AW Contacts for remote indication, reservoir low1
-AY Contacts for remote indication, low suction pressure1
-COM Low suction pressure alarm, (Includes selectable auto/manual reset, audible, visible and remote alarms, initiating pressure switch not included)
-CPL Contacts for remote indication, system 115% over pressure (for use with PLD engines only)
-CTS Built-in low suction pressure alarm panel (Includes selectable auto/manual reset, audible, visible and remote alarms and mounted and wired pressure switch)
-EE Additional contacts for remote indication, engine trouble (common alarm) - 1 set provided as standard
-EF Additional contacts for remote indication, main switch mis-set (common alarm) - 1 set provided as standard
-EH Contacts for remote indication, relief valve discharge1
-EJ Visible fl ow meter on alarm 1
-EK Contacts for remote indication, fl ow meter on1
-JR Visible jockey pump running indication
-JT Audible and Visible jockey pump trouble indication
-KH Contacts for remote indication, common output for any alarm
-LC Contacts for remote indication, high fuel level1
-LD Visible fuel spill alarm1
-LE Contacts for remote indication, fuel spill1
-LG Contacts for remote indication, reservoir high1
-PE Contacts for remote indication, low system pressure
MISCELLANEOUS
-AZ Low pump room temperature switch, mounted and wired
-BA 220-240 Volt operation
-EL Series pumping, high zone controller
-EM Series pumping, mid zone controller
-EN Series pumping, low zone controller
-S Tropicalization
-ZPA Customized, annual service display message (factory programmed)
-ZPN 5150 Ethernet Connectivity Module (Allows users to monitor limited controller status via a single computer or over a computer network)
-ZPM Serial Modbus RTU Communications Protocol (Allows users to monitor all aspects of the controller status via a RS485 communications network (system integration required). (Includes RS485 to twisted pair breakout module, optical isolation module (4000 ft. range) and customer connection terminal blocks).
Options/Modifications
Brochures and Data Sheets
Product Information/Sales
Technical Information
Product Information/Technical

Firetrol
Service Support
Keep mission-critical Firetrol Systems running at optimal levels.

+1 919 462 7105
24 x 7 x 365 respon​se
Learn More